How To Fix A Dropped Stitch In A Finished Project | You Must Try

After dropping a stitch in your knitting process, you may think that you have nothing to do now and that there is no way you can fix it without starting from the beginning again. You should not worry about this mistake as it is not uncommon to make. Even the experts in the knitting industry can make such mistakes.

Fortunately, you can fix such mistakes with a few simple tricks. Moreover, the dropped stitch will be removed in such a way that it won’t even be noticeable once the project is done. In this article, we will show you how to fix a dropped stitch in a finished project. Let’s dive in!

How To Fix A Dropped Stitch In A Finished Project – Step-By-Step Process

When you finish your project but see that there is a dropped stitch remaining in the project, you may think about starting over the project again by unraveling the bind off. But, this thing is absolutely unnecessary when you can solve it in a traditional way with a little practice and effort.

The primary trick here is to pick up that dropped stitch and hide it in a natural way. Now, follow the below steps to successfully implement that little trick.

Necessary Things For The Fix

1. Scissors
2. Needle
3. Thread or Yarn
4. Crochet Hook

1. Mark The Dropped Stitch

First, you need to locate the dropped stitch in your work. As you’re looking for a solution for that specific stitch, it won’t be hard to mark it.

Usually, the dropped stitch creates a loop at the base of the ladder. Simply insert a small crochet hook into that loop. Remember to use a size US F crochet hook and insert it from the front to the back with the ladder of stitches which are located behind the loop.

2. Line Up The Stitch

Now, pick the first horizontal ladder, which is rung with the hook. Then, pull that ladder through the dropped stitch, taking it from back to front. At this stage, free the original and first loop. And, keep only the first picked-up stitch on the crochet hook.

Next, repeat the above process to finish collecting all the horizontal ladder stitches. In this way, you’ll be able to line up the dropped stitch with your bind-off.

3. Release The Crochet Hook

Picking up a stitch from the bind off may seem like struggling for the first time, but trying several times can make it successful. After picking up that stitch, you should pull it through the loop.

However, if you fail to pick up one of the stitches, hold the dropped stitch gently next to the blind-off stitches. Then, temporarily release the crochet hook to move to the next step.

4. Thread The Yarn

At this step, you need to thread the collected yarn onto the needle. Gladly, you can also use matching thread instead of the yarn. After threading the yarn, weave the end of the yarn in and out. And, do this on your knitted piece of work on the backside. This way, you can secure it and anchor it for completion.

5. Insert The Needle

Now, you should complete the crucial part carefully. First, remove the crochet hook again and insert the needle into your dropped stitch from back to front. Then, pull the yarn off the needle all the way through the stitch. After that, you need to wrap the yarn back over the dropped stitch.

Similarly, you should weave it in and out through the stitches. And, all of these things should be done on the back of the piece. By doing such weaving for some time, the dropped stitch will be tacked down. Besides, you can keep the dropped stitch from unraveling again.

6. Complete The Job

Now that your process of joining the dropped stitch is complete, you can cut off the excess yarn from the needle. And, finally, remove the needle to finish the process.

Not to mention, the entire process will work for the stockinette-type pattern stitches. When you want to pick up purl-type stitches, you should pull the ladder through the dropped stitch, reversing the way from the front to the back instead of back to the front.

Frequently Asked Questions and Answers

Can You Fix A Dropped Stitch After Binding Off?

Yes, of course. If you can bind off the stitch properly, simply pick up a stitch from the bind off. Then, you can simply pull the stitch through the loop and follow the entire process, as mentioned above. Correcting a dropped stitch after binding off is actually the same process as ours.

How Do You Fix A Dropped Stitch In Several Rows?

If the dropped stitch is in stockinette stitch, you’ll have to rescue the dropped stitch from the knit side. Now, reach through the dropped stitch with a crochet hook. Then, select the ladder to pick up the bottommost strand. Finally, you should pull the strand through the stitch towards you to form a new stitch. And, this way you can fix several rows at once. Just be careful not to be mistaken.

What To Do When There Is No Ladder?

If you have a dropped stitch in your project, but there is no ladder available to pick up, you can try to ladder up the dropped stitch. And, ladder up the stitch until you are satisfied with the tightness. Then, connect the stitch to a neighboring stitch using a short strand of yarn. As a result, the loop will be fastened off, and you should secure it to prevent it from going down. When the setting is not too many rows down, ladder the stitch up to the needle. Finally, you’re done now.

Conclusion

Though the mistake of dropping a stitch may seem a critical thing, you can simply solve this problem. To solve it technically, you’ll have to follow the above techniques, and the dropped stitch will automatically be hidden. After hiding the dropped stitch, your fixing process is complete since most people won’t be able to identify the hole in the work.