Usually, you can fix the fuzzy side of Velcro just by cleaning it. You can just remove the dirt and fabrics by combing or tweezing out.
However, if the shape of it is too damaged or torn apart, it may get more damaged trying to clean it. Therefore, if you notice that it is high time to change your Velcro.
How to Fix the Fuzzy Side of Velcro – Showing Techniques
Over time, your Velcro fastener tapes get dirty with debris and other materials. As a result, the tape does not stick to the fuzzy side anymore.
In this circumstance, you have to clean your Velcro tapes. Here are some ways to fix your Velcro-
Way 1: Using Your Fingers
When you see any dirt or large pieces stuck on your Velcro, first try using your fingers. Use your fingers to plunge out the pieces of dirt.
Way 2: Bushing with Toothbrush
Depending on the size of your Velcro, you can brush with either a toothbrush or other types of brushes. If your Velcro is a small one, you can neatly brush it with a toothbrush.
Way 3: Using a Comb
You can also try using a comb. You can just brush your Velcro tape on the fuzzy side to clean the non-fabric or other lint materials.
Way 4: Using Tweezers
In addition, you use tweezers to tweeze out the dirt that is stuck into the Velcro tape. However, this step will cost you more focus and time.
Way 5: Scrap the Dirt
Lastly, the easiest step is to scrap the dirt or plastic material away. These plastics prevent the fuzzy side of the Velcro from sticking to the rough side.
What is the Fuzzy Side of Velcro Called?
As we know, Velcro tape has two sides in them. Rough side and soft side or fuzzy side. The rough side is the one you get a stick on to the soft or fuzzy side.
In addition, you can call the rough side the hook. On the other hand, you can call the soft side the loop.
The hook and loop fastener’s name was inspired by how the technology works. Each fastener has two pieces of materials- one with lots of tiny loops and another with lots of tiny hooks.
Does Washing Velcro Ruin it?
Yes, you can wash Velcro. Moreover, washing your Velcro will not ruin it. Whether it is baby bibs, sporting equipment, or shoes with Velcro straps, you can rest assured that it is fine, as long as you wash it the right way.
However, if you do not want the smell to transfer, you should hand wash in the sink first. Then, try to get most of the smell and dirt off and put it in the machine for a thorough cleaning.
Before you put it in the washer or go to the hand wash or delicate cycle carefully read the laundry instructions for Velcro. Otherwise, you may damage your Velcro or other clothes.
How Do You Restore Fuzzy Velcro?
Here are some steps to make your fuzzy Velcro restore
1. At first, try to find the rough and nylon side of the Velcro. Use the toothbrush to brush through this side several times to try to clear out debris.
2. Also, use safety to clear out more fuzzy debris from the nylon side of the Velcro.
3. Then, light a match to make the side firm.
4. Lastly, Carefully trim the burned side of the Velcro with the scissors to make it even.
How Do You Remove Lint and Hair From Velcro?
One of the most common dirt that is stuck on the Velcro is hair and lint. You can follow the following steps to get rid of hair and lint from your Velcro-
1. At first, try to vacuum over the Velcro to remove as much lint as possible.
2. Then Scrub the Velcro with a nail brush and you can also add some soap. This will help to loosen up and remove the lint.
3. Lastly, Use a narrow tooth comb to comb out the remaining lint.
Frequently Asked Questions and Answers
Qu 1: How do you make the loop side of Velcro stick again?
The trick to making a worn-out Velcro stick again is to use a toothbrush to clean out the dirt that is accumulated between those tiny loops that make Velcro stick together. Sometimes I have removed the old Velcro and simply used a new strip of Velcro.
Qu 2: Why does Velcro stop working?
Velcro loses its stickiness when it is clogged up with lint and grime. Usually, you can make Velcro stick again by cleaning lint and debris out of it, but if your Velcro is old and worn out, you will have to replace it. To prolong the life of your Velcro, take preventative measures to keep it clean
Qu 3: Can Velcro damage clothes?
Even very slight contact with Velcro causes yarn breakage or what we call fabric picking which is a process that results in fiber ends that have pulled away from the fabric surface. Custom apparel is even more susceptible to Velcro damage.
Qu 4: Does Velcro loosen over time?
Velcro can lose its stickiness when it gets worn out, in which case it usually needs to be replaced. However, if your Velcro is not sticking because it is clogged and dirty, you can clean it to help it stick again. Start by using your fingers to pick out any large pieces caught in the Velcro.
Conclusion
You have to fix your Velcro before it is completely worn out. If the fuzzy side is fully damaged you have to buy a new one or replace it with new tape.
Try to clean your Velcro regularly or within a definite time. Because keeping your Velcro clean will last the tape much longer.
Leave a Reply