Using a rack hanging on the wall, saving threads in smaller containers, thread trays, or transparent bags are the most common and practical ideas. But except for all of these, you can keep your threads safe and reasonable in your pattern, like making your rack a homemade hanger.
Serger Thread Storage Ideas
People love to keep different colors of threads, but how you can keep them under control and not use too much space! That’s why we will give you some widely used ideas that will surely help you store your thread and bobbin.
1. Thread Storage Rack
We are going to start with this method of storing thread using a rack on the wall. Firstly, it is a beautiful piece for home decoration. Also, it is very serviceable as you can watch all the threads, take any of them quickly, use them, and put them back in place. Racks are generally famous for holding lots of threads in very little space.
2. Storing in Bins
One can just pull them whenever he/she needs them. The idea is helpful while traveling or going to a sewing class because these containers are portable. Some of the bins are crystal clear plastic boxes. And a significant benefit of a plastic bin comes to mind is, you can see through them. Just arrange your threads inside and lock the box.
However, there are some other containers made of steel and small in size. These boxes are mainly for keeping small spools. They are inexpensive too. Probably, various companies supply tinned containers of different sizes.
3. Using Cone Thread Tray
It is a friendly and cute solution for keeping all treads safe and managed properly. Big chunky serger threads can be set on these types of trays. But the only problem is, there is no way to mount it on walls.
4. Make Your Rack Yourself | A DIY Guideline
Building a bobbin rack is not a complicated task at all. What we require are:
- Six pieces of wood (nearly 43 cm in length)
- An angle ruler (set it at a 45-degree angle)
- Some rubber bands
- Hangers
- A drill bit
- Screws (keep your screws a little bit larger than the drill bit)
- Sticks (maybe made of bamboo or wood, to hold the bobbins or threads)
Now here are your steps.
1. Couple Two Wood Pieces
Take two of the wood pieces, and fasten them using rubber bands on both edges. One should use more rubber bands than required on each side.
2. Measure From the Edge
Measure 4 cm from each edge. Make a mark by pencil and then 7 cm for the next five. Draw straight lines on the spots through your wood pieces.
3. Bring Your Angle Ruler
Now the time of using the angle ruler has come! Fix the ruler on each mark and draw straight lines. Similarly, draw symmetric lines on every impact of the wood piece under the first one.
4. Attach the Screws
Firstly, find the center point of each wood piece and draw a horizontal line through the wood and the topic. Do the same for the other detail. The following job is pulling off all the rubber bands. And finally, make screw holes using a drill machine and sit the screws there—Dill the points on which the horizontal line and the lines drawn by the angle ruler intersect. However, don’t forget to set a hanger on each edge.
5. Start Working with Slats
These slats do the task of holding the bobbins. Take three wood pieces and bind them together (use the rubber bands again). Drill 10 holes on each piece, keep the holes 10 cm apart and finally draw straight lines through them. Measure the center again and draw a horizontal line. Now drill the intersections, and consequently, you will get the spaces to set the sticks to carry the threads.
6. Hit the Sticks and Secure them in Place
Fill the holes with sticks, slightly hit them using a hammer, just a few little taps. I forgot to tell you, make holes in all the edges.
7. Find the Frame Now
Place all of these wood pieces in between the last two wood pieces. Tighten all the screws set on them before.
Thus, the homemade thread rack is ready to use!
5. Hanging Bags for Threads
Such an easy method! A piece of fabric can make the whole bag.
1. Choose your Fabric
Take a square-shaped fabric. Then collect three triangular-shaped transparent plastics (watch the images below).
2. Sew a Chain
Afterward, we have to sew the chain on the length of the plastic piece. Put an extra cloth on the sewing part. Later set it on the fabric and sew the all-plastic edges with the material. Then you will find a transparent pocket on the cloth. In the same way, make more bags you want.
3. Ready to Use!
Finally, create two hangers, sew them on top of the fabric, and hang them on walls. You may secure all the edges by putting in extra pieces of cloth.
Frequently Asked Questions and Answers
How do you store cotton?
You should store cotton in the same way everyone keeps silk, in a dark and cold area. Insects may attack if they find their light. If you have the target to keep them, don’t starch. Unfold frequently.
How do you store sewing materials?
Store the materials like thread and loose tools in tiny boxes and then in a drawer. Keep the top drawer booked for the most used tools while sewing. Likewise, fill the lowest drawer with the less-important things (they may be sewing machine books, warranty cards, etc.).
How do you maintain sewing thread?
Never let the sunlight fall upon the threads. Store them in a cool and dry space but not damp at all. Humidity can affect the threads.
Conclusion
In the final analysis, we can realize that there are no strict rules to store serger threads. You can make your method to keep the threads safe. But the methods discussed above are proven and used widely. So, choose one from them and do hassle-free storage.
Leave a Reply