Thread wrapping around bobbins is a common sewing problem. And This occurs when the thread becomes tangled around the spool of the bobbin, causing it to become knotted or bunch up. As a result, your sewing project can become frustrating and time-consuming due to stitching difficulties.
Most people believe it’s a bobbin problem, but in reality, it’s not a bobbin issue for a good portion of the time, and no repair person is required. People frequently ask, ‘Why does my thread wrap around the bobbin? In this article, we have tried to disclose this issue. However, there are some steps you can take to prevent the thread from wrapping around the bobbin and keep your sewing projects running smoothly.
What is The Reason for My Thread Wrapping Around the Bobbin?
All sewers, novices, and professionals experience thread bunching and wrapping around the bobbin. You can quickly halt, delay or derail your project with this nest of tangled and loopy threads. While it is reasonable to assume that the problem is with the machine’s bobbin, this is rarely the case. There are almost always other reasons for thread bunching around a bobbin. You can fix this problem quickly to get back to sewing.
Lack of proper maintenance, the buildup of lint and debris, improper threading, using the wrong needle, or using a different thread weight are some of the reasons your thread is wrapping around the bobbin. Often, the line wraps around the bobbin due to tension between your top thread and the bobbin. This article discusses the causes of this frustrating phenomenon.
There Are Several Reasons Why the Thread Wraps Around the Bobbin
Reason 1. Improper Threading
This problem causes many sewing machine issues. Unless the threads are threaded correctly, the threads will get wrapped around the bobbin if the tension is wrong. A sewing machine is easy to thread, but you should keep an eye on the tension panels to ensure the thread tension is correct. When the tension on the thread is too much or too little, there will be a problem. Check what the problem is and make sure your machine is threaded correctly.
Reason 2. Dust Accumulation
The buildup of dust and gunk in the sewing machine can also result in the thread not behaving normally and getting wrapped around the bobbin. The constant use of the machine settles dust particles and gunk on the surface, which hinders normal machine operation. As a result of such a problem, parts of the machine become jammed. It tends to cause problems like thread wrapping, Etc, when dust particles and gunk accumulate on the machine.
Reason 3. Machine Needs Oiling
During intense and regular usage, sewing machines become dry and need oiling. When the machine needs oiling, the parts will become stiff and not work properly. As a result, the thread bunches up around the bobbin, wraps around the bobbin, Etc. For the machine to work efficiently, you must ensure it is properly oiled if you use it continuously.
Reason 4. Bobbin Not Insert Well
This problem commonly occurs when the bobbin is inserted incorrectly or halfway into the machine. By improperly inserting the bobbin, it may cause problems with the normal operation of the sewing machine. Don’t insert the bobbin incorrectly or tilt it so that it disturbs the thread or wraps around it.
5 Ways To Keep The Thread From Wrapping Around The Bobbin
If you want to rethread, clean, or change the needle on your sewing machine, just make sure the bobbin is secure and free of tangles. Every time, it works. Here are some tips for completing all of this correctly.
The most common sewing machine malfunction is tangled
thread or thread wrapped around the bobbin case. Yet, don’t freeze or hustle because of this issue; it is quite often very simple to fix. You can solve the problem by following the below-mentioned points.
1. Re-Thread The Machine
Any fault in the threading can lead to many problems. If you are experiencing the issue of wrapping the thread around the bobbin, the first step that you need to take is to rethread the sewing machine. The process of threading a sewing machine should be done very cautiously, and you need to ensure that all the tensions are applied to the threads and that the bobbins are just right and are not too tight or loose. After the rethreading, you will notice that if the problem were caused due to this issue, it would get solved instantly.
2. Check The Bobbin Case
If the bobbin case of the sewing machine is damaged, the thread will wrap around the bobbin and cause this problem. The machine’s bobbin may be broken or not inserted properly. For the sewing machine to function properly, you must check for such issues and fix them if necessary. It is important to fix the bobbin case properly so it can wind up well and work smoothly.
3. Try Changing The Needle
Re-threading may resolve the issue, but I always change my sewing machine needle if it does not. The needle is an extremely cheap part to replace and part of the upper threading. Continually let the feed hounds do their work. You hazard twisting the sewing machine needle if you pull the fabric to the back of the machine instead of letting it feed through the machine.
4. Thread The Bobbin Well
Inspect the bobbin if the malfunction persists after changing the needle. Occasionally, the bobbin may be at fault if it needs to be threaded properly. On the off chance your thread isn’t smooth enough, is lopsided, has hitches, is free on the bobbin, or has not been threaded correctly. Make sure the bobbin is accurately embedded in the bobbin case as well. If you want to check how your sewing machine control is supposed to be embedded in the bobbin case, you should check your sewing machine control.
5. Clean The Machine Well
Finally, try cleaning your machine if you have tried every solution and failed. Generally, sewing machines should be cleaned every three to four weeks if used consistently. Is your upper thread shredded and leaving pieces in the upper thread way, or do you see wads of buildup and thread stowing away under or around the bobbin case? In that case, it’s time to remove the buildup, oil the machine, and do any other maintenance described in your manual.
Important Note: You can find the most detailed instructions on threading your sewing machine in its user manual. You can find the pdf for your specific sewing machine’s user manual online if you need help or the user manual booklet.
When the presser foot is up, you always thread my machine with the thread set nicely. The tension is locked in if the presser foot is down, and it will prevent the string from positioning correctly. Strings not positioned in the tension discs cannot connect with any strain, and joint glitches are almost certain to occur.
Frequently Asked Questions and Answers (FAQs)
Why Is My Bobbin Stuck in the Bobbin Case?
There are many reasons why your bobbin may get stuck in the bobbin case. Bobbin threads could knot, bobbin cases may have grooves that hold thread back, or your bobbin may be misplaced. The bobbin case could also be dirty. Clean your bobbin case first before releasing your bobbin.
Why Is My Back Thread Looping Underneath?
The most common cause of looped stitches is improper tension. Loosening the top or tightening the lower tension can correct a loop on the upper side. Underside loops are usually best corrected by adjusting the upper tension.
How to Fix Sewing Machine Bobbin Tension?
Your bobbin tension is too tight if the bobbin case does not budge. Tighten your bobbin tension by turning the tiny screw on the case clockwise. Turn the screw counterclockwise to loosen the bobbin tension. Start with a quarter turn or less.
Conclusion
Several reasons your thread could be wrapping around your bobbin, including tension issues, low maintenance, and machine threading issues. Hopefully, this article has answered all your questions regarding ‘Why is my thread wrapping around the bobbin?’. Following all the above steps will prevent your sewing machine from having any problems with its bobbins.
Leave a Reply